Pag. 69 de 73
Manuale Didattico – ACO
Training manual :PIGMA Gal Evo
9 FIRST STARTING AT WORK
1.Check plug
connection and
electric power supply.
Validated
…………………….
2. Verify type of gas
(make changes by using
proper tooling kit if
necessary).
Validated…………………….
3.Verify gas
connectioins.
Validated
…………………….
4. Measure inlet gas
pressure at rest.
Validated
…………………….
5. Verify flue exhaust
system
Validated …………………….
6.Fill-up heating
installation
Validated
…………………….
7.
Check
hydraulic
plug connections and
drain plugs.
Validated
…………………….
9. Purge installation by
use of « Purge » function
( by touching button ESC)
one time during 5 sec.
Validated
…………………….
10. Set power point
for maximum heating .
Validared
…………………….
11. Adjust
heating
parameters
according to
installation features
Validated
…………………….
13
.
Check sanitary flow
rate at the water draw
off taps
Validated
…………………….
15
.
Measure ionization
current at rated power
Validated
…………………….
16
.
Explain to user
functional procedures
to follow
Validated
…………………….
8.Remove jamming
coindition from the pump if
necessary
.
Validé
…………………….
12. Verify maximum
and minimum power in
sanitary mode.
Validated
…………………….
14. Perform a record of combustion
grade («Combustion Analysis »
function) by touching RESET
button during 5 sec sur touche
RESET).
Validated
…………………….
