MAINTENANCE /
REP
AIR
TROUBLESHOOTING
OPERA
TION
ASSEMBL
Y /
INST
ALLA
TION
SAFETY /
SPECIFICA
TIONS
GETTING ST
AR
TED
14
OPERATING INSTRUCTIONS (CONTINUED)
Risk of unsafe operation. Stand on a stable surface and grip gun/spray wand firmly with both
hands. Expect the gun to kick when triggered.
13. Release trigger to stop water flow.
Risk of injury from spray. Always engage the trigger lock (O) when gun is
not in use. Failure to do so could cause accidental spraying.
Shutting Down
1. After each use, if you have applied chemicals, place detergent siphon hose into
container of clean water and draw clean water through chemical injection system to
rinse system thoroughly.
Risk of property damage. Failure to do so could cause damage to the pump.
2. Turn engine off. See Engine Owner’s Manual.
Risk of property damage. NEVER turn the water off with the engine running.
3. Turn water source off.
4. Pull trigger on spray gun to relieve any water pressure in hose or spray gun.
NOTE:
Failure to release system pressure will prevent removal of high pressure hose from spray gun or
pump connection.
5. See Storage section in this manual for proper storage procedures.
O
Figure 23
