M1.1 rear panel connections
(1) Right channel negative loudspeaker terminal (customized Argento Audio connector)
(2) Right channel positive (or bridged mono positive) loudspeaker terminal (customized Argento Audio connector)
(3) USB port for software upgrades [CONTROL board]
(4) Ethernet port for network remote control [CONTROL board]
(5) High power section fuse (16A for 230V mains, 32A for 100V and 115V mains)
(6) Analog ground connectors. The bottom one can be connected to digital ground (Earth) using the provided jumper
(7) Earth connector. Internally connected to digital ground
(8) Right channel XLR balanced analog input
(9) Right channel XLR balanced analog output (pass-through for amplifier daisy-chaining)
(10) Right channel RCA single-ended analog input
(11) Right channel BNC single-ended analog input
(12) Left channel RCA single-ended analog input
(13) Left channel BNC single-ended analog input
(14) Left channel XLR balanced analog output (pass-through for amplifier daisy-chaining)
(15) Left channel XLR balanced analog input
(16) Left channel positive (or bridge mono negative) loudspeaker terminal (customized Argento Audio connector)
(17) Left channel negative loudspeaker terminal (customized Argento Audio connector)
(18) Low power section power cord receptacle
(19) Mains power On/Off switch
(20) Low power section fuses (1.6A + 250mA for 230V mains, 3.15A + 500mA for 100V and 115V mains) and voltage selection
(21) High power section power cord receptacle
Rev 3.0
M1.1 User Manual
17
(1)
(2)
(4)
(6) (7)
(10) (11)
(16)
(17)
(6)
(5)
(21)
(20) (19) (18)
(3)
(9)
(8)
(12) (13) (14) (15)
