•
Do not install it in a confined space and make sure there is sufficient airflow around the unit, including under the unit.
•
Never install your M1.1 power amplifier directly on a carpet or any soft material, as it would block the air vents and
prevent adequate airflow.
•
Do not operate under high ambient temperature (>40°C) or in extremely high humidity conditions
•
Only use options and accessories specified or recommended by the manufacturer
•
Do not open the unit nor try to service it by yourself. Always refer to a qualified technician for service, maintenance or
upgrades. Failure to do so will void the unit's warranty
2.3 User manual
Please read this manual carefully before making connections or operating your M1.1 power amplifier. After reading this manual,
please store it in an accessible place for future reference. If, after reading this manual, you feel unsure about how to make
connections or how to operate the unit, please contact your authorized dealer for assistance.
2.4 Mains supply
In order to use the amplifier to its full capabilities, the M1.1 needs two independent mains phases to be connected to the back
panel. The power section being able to deliver up to 2200W, it is on the edge of exceeding the maximum current a traditional
mains phase is able to deliver before the circuit breaker trips. With the addition of the power needed by the rest of the amplifier
(second and third transformer sections), the maximum current could be exceeded and the circuit breaker would trip. It is therefore
recommended to use two separate mains phases to ensure that in no circumstances will the circuit breakers trip.
Before connecting any mains power cord, make sure that the mains voltage selection at the back of the unit matches your local
mains voltage.
Make sure your M1.1 power amplifier is disconnected from the AC wall socket in the following cases:
•
When making connections (it is also recommended to disconnect the rest of the system from the AC wall socket)
•
When cleaning the unit
•
During thunderstorms
•
When unused for a long period of time
2.5 Transport and packaging
The M1.1 power amplifier must always be stored in its original packaging during transport. Doing so will ensure an optimal level of
protection of your unit. Therefore, keep all packaging in a dry and clean place for future use.
Finally we recommend to remove the adjustment spikes and to put them back in the foam holes of the M1.1 box during transport.
Vibrations during transport may cause the adjustment spikes to move from their fully retracted position. There is risk of scratching
Rev 3.0
M1.1 User Manual
13
