C1.2 User Manual
18
Following table shows the actions of the user control knob for Shortcuts.
User Control Knob Action
Unit State
Unit Action
[NP] Normal Push
Shortcut (except last)
Skip to next Shortcut
Last Shortcut (SETUP) or Exit Shortcuts mode
after current Shortcut
(Normal mode)
has been modified
[LP] Long Push
STANDBY
Wake from STANDBY
Any other state
Go to STANDBY
[C>>] Center Rotate Right
Shortcuts (except last)
Modify parameter up (when available)
Last Shortcut (SETUP)
Enter Menu mode
[<<C] Center Rotate Left
Shortcuts
Modify parameter down (when available)
[E>>] External Rotate Right Shortcuts (except last)
Modify parameter up (when available)
Last Shortcut (SETUP)
Enter Menu mode
[<<E] External Rotate Left
Shortcuts
Modify parameter down (when available)
PHASE POLARITY Shortcut display elements
1. Shortcut title (Parameter, for other Shortcuts, title
changes accordingly)
2. Arrow indicating External Rotate Right [E>>] if
applies. The item below indicates the next parameter
value (up direction)
3. Next Parameter Value if External Rotate Right
[E>>] is applied (parameter up)
4. Current Parameter Value (for other Shortcuts the
current Value of the Parameter is displayed on this
line)
5. Next parameter value if External Rotate Left [<<E]
is applied (parameter down)
6. Arrow indicating External Rotate Left [<<E] if
applies. The item below indicates the next parameter
value (down direction)Bridge)
2
3
1
4
The PHASE POLARITY Shortcut gives a good illustration of how to navigate a Shortcut screen. Navigating other
Shortcuts is similar.
6
5
