ASSEMBLY (CONTINUED)
Mounting PSA Sandpaper Disc
NOTE: The 6 x 9˝ Belt Disc Sander only uses 9˝ diameter abrasive
sanding discs with Pressure Sensitive Adhesive (PSA) backing. To
apply the sandpaper:
1. The metal disc plate is pre-installed on the machine. Locate the
9˝ PSA sandpaper disc and peel the protective backing off.
2. Center the sandpaper over the metal disc plate, then press the
sandpaper firmly in place. See Figure 6.
See page 9 for instructions on changing the sandpaper disc.
Before plugging in and turning on the
machine, mount the sander and complete
all of the adjustments in the instructions that follow. This
will ensure that the sander is correctly set up for safe and
efficient operation.
INSTALLATION
The machine must not be plugged in and
the power switch must be in the off
position until all adjustments are complete.
Mount Sander
NOTE: Although compact, the sander is heavy. At least two people
are required to lift from carton.
Choose a suitable location to mount the sander. The sander must
be installed in a place with ample lighting and correct power supply.
Make sure there is plenty of room for moving the workpiece. There
must be enough room that neither operators nor bystanders will
have to stand in line with the wood while using the tool. Allow room
so that belt assembly can be positioned horizontally.
Figure 7 shows the base dimensions, mounting holes and required
space to allow for table assembly and belt assembly in horizontal
position.
The sander must be bolted to a firm, level surface. Sander can be
installed on a workbench or a tool stand using bolts, lock washers
and hex nuts (not supplied).
6
G
ET
TI
N
G
S
TA
R
TE
D
SA
FE
TY
/ S
PE
CI
FI
CA
TI
O
NS
AS
SE
M
BL
Y
/ I
NS
TA
LL
AT
IO
N
O
PE
R
AT
IO
N
TR
O
U
B
LE
SH
O
O
TI
N
G
M
AI
NT
EN
AN
CE
/ R
EP
AI
R
NORSE Operating Manual & Parts List 9681115
Figure 7 – Base dimension and required space.
17
1
⁄
2
˝
18˝
12˝
21˝
30˝
3/8˝
Dia.
8
1
⁄
2
˝
Figure 5
Figure 6 - Mount sandpaper disc.
Lock Handle
Washer
9681115_oipm_En012_9643069.01 0518 05/22/18 Page 6