Power off the aircraft
Long press the power switch for at least 3 seconds
Power off the remote controller
19
DF801B USER MANUAL
Notes:s for the return to home point as precise as possible, please ensure the GPS positioning function has
been turned on to record the aircraft's position before its takeoff and choose an area with no obstacles.
With the GPS positioning mode turned on, it will automatically enter auto return to home mode if the
remote controller loses control.
Once the auto return to home mode is enabled, if the aircraft flies below 30 meters of altitude, the
aircraft will automatically ascend to 30 meters before returning to home point. However, if the aircraft
flies over 30 meters of altitude, the aircraft will return to home point at the current altitude. Please do
not control other functions during the process of return. Please ensure there are no obstacles in way of
return in case of any potential accidents..
After the aircraft lands and the propellers stop rotating, long press the power switch for at least 2 seconds to turn off the aircraft and
the remote controller.
Warning: Please stay away from aircraft until propellers stop rotating completely.
8. Battery Storage
(1) After the flight completes, remove the batteries from the aircraft and the remote controller and store them separately.
(2) Keep batteries out of the reach of children. Storing batteries in a dry environment. DO NOT leave the battery near heat sources.
The optimal storage temperature should be between 22
℃
to 28
℃
.
(3) If a battery is found damaged, please discharge the battery and dispose it properly according to the local regulations and laws.
9. Pair the Aircraft with the Remote Controller
The aircraft has already paired with the remote controller by default. If the remote controller has been replaced, please pair again
complying with the following steps:
1) Switch on the drone and the remote controller.
2) Unlock your mobile phone, enter the menu “Settings-WLAN” to view the Wi-Fi network list, among which you can see “Drone-
xxxxxx” (xxxxxx consists of characters and numbers) of the drone and “Controller-xxxxxx” of the remote controller (xxxxxx consists
of characters and numbers). Please take down the serial number of the remote controller for further reference.
3) Click the Wi-Fi network of the drone to connect.
4) Enter the APP interface and click “…” in the top right corner to enter the menu.
5) Find “RC Paired” and click “Pair”.
6) A dialogue box will pop up. Type in the serial number of the remoter controller in the box and click “Pair” to confirm.
7) Navigate your mobile phone to “Settings-WLAN” again to check the serial numbers of the drone and the remote controller. If the
two serial numbers are correct, the pairing will be successful, with the drone’s rear lights turning flashing green or solid green.
Summary of Contents for DF801B
Page 30: ......
