The light turns from blinking blue to blinking
or solid green.
14
DF801B USER MANUAL
3) Self-check and pairing
Power on the aircraft and put it on a flat level surface for 30 seconds for self-checking. When the aircraft's indicator light turns from
blinking or solid blue to blinking or solid green, the aircraft has successfully paired with the remote controller.
2. Connect with the APP
1) GPS signal status with the aircraft connected with the APP
Connect the aircraft with the APP. When the indicator light of the aircraft turns solid green, indicating strong GPS signal and the
position located, switch the flight mode to GPS mode to get ready for takeoff.
When the indicator light of the aircraft turns blinking green, indicating weak GPS signal or even no signal, manually choose Mode A
(Manual Mode) to control the aircraft (It requires experienced skills for operation and may not be suitable for novice pilots).
Notes: Set the drone up and get ready to take off after the aircraft
’
s indicator light turns solid green (indicating
good GPS signal).
Please choose a wide open space for your flight. Do not fly over tall steel structures or metal materials,
which may interrupt the GPS signal.
2) Connect with the APP
Open the APP, enter the WLAN settings,
click "Controller-XXXXXX" to connect.
Open the APP and enter the main interface as shown in the below
left picture. Click "Start Flying" to enter the flight control interface as shown in the below right picture.
Notes:The aircraft can only connect to 5G Wi-Fi enabled mobile phone.
Use the APP to monitor the real-time image and video footages and the flight status of the aircraft. It
is able to use both of the remote controller and the APP to control the aircraft. However, some functions
Summary of Contents for DF801B
Page 30: ......
