51
Controls and Features
Main Light Switch - 8
The main light switch consists of 3 positions. Turn the switch to
select the following functions:
When the switch is at this position, head light, position
light, tail light and instrument light are on .
When the switch is at this position,daytime running light,
tail light, and front position light are on.
●
When the switch is at this position, only daytime running
light is on and all lights are off
Low Beam / High Beam
High Beam is selected when the switch is turned to this
position�
Low Beam is selected when the switch is turned to this
position�
NOTE:
Ignition key must be turned to ‘ON’ before operating head lights.
CAUTION
Do not use the headlights with the engine turned off for more
than 15 minutes. The battery may discharge to a point that the
starter motor will not operate properly. If this should happen,
remove the battery and recharge it.
8
8
Summary of Contents for CF1000UU
