138
Maintenance
Brake Fluid Change
Complete brake system fluid replacement should be performed only by trained service personnel. Have your
dealer replace the following components during periodic maintenance, or when they are damaged or leaking:
• Replace the brake hoses every four (4) years.
Brake Light Switch Operation
The brake light switch is activated by foot brake pedal pressure, and is properly working when the brake
light comes on just as braking takes effect. Check that the switch assembly or the electrical circuit is working
properly in case of brake light failure.
Suspension
Some front suspension components of the vehicle do not require maintenance or lubrication. Ensure these
components are cleaned regularly, and are not loose or damaged before operating the vehicle.
Pivot Lubrication
Lubricate the upper and lower pivots of the front and rear suspension:
• Add grease into the upper and lower pivot grease nipples (1) located at the frame with a grease gun
until grease lightly flows from the bushing.
Summary of Contents for CF1000UU
