118
Maintenance
Engine Oil
Always check and change the engine oil at the intervals outlined
in the Maintenance Schedule. Change oil more frequently under
severe use conditions.
To Check the Engine Oil Level
With vehicle on a level surface, check the oil level as follows:
1�
Place the vehicle on the plain ground.
2�
Start the engine and allow it to idle for (20~30) seconds. Stop
the engine�
3�
Wait for a few minutes to allow the engine oil to settle down in
crankcase�
4�
Remove the service hole plate behind the passenger seat.
5�
Unscrew the oil dipstick and then wipe it off with a clean rag.
6�
Insert the dipstick completely into the oil filler hole, and then
remove it again to check the oil level�
NOTE
Engine oil level should be between the upper and lower marks.
7�
If the engine level is below the lower mark, add oil to proper
level�
8�
Insert the oil dipstick and fully tighten it.
9�
Install the service hole plate behind the passenger seat.
1
Oil dipstick, Engine
1
MAX
MIN
Summary of Contents for CF1000UU
