C
Y
K
Tech
www.ceyeko.com
Page 37
C h a p t e r 5 : S e t t i n g s
5.1 Introduction of Interface of Operation Mode
Two working modes, operating and setting modes are provided for this series of ult-
rasonic level meter. After being powered on and initialized, the level meter will enter
in the operating mode automatically, and start to measure data.
Measurement at the time is under material level measurement mode and the relative
output is 4~20mA. Output current is in direct proportion to the material level.
The interface of ultrasonic level meter under operating mode is as follows:
Note: language selection, hold the and buttons at the same time to switch
Two-wire (English)
Four-wire (English)
Summary of Contents for LUDP
Page 12: ...CYK Tech www ceyeko com Page 12...