11
⑤
Replace it with new imaging lamp, screw down 4 screws fixing the imaging lamp, insert the
imaging lamp cable into two heat-shrink tube, and fit the imaging lamp cable into the spindle.
⑥
The heat-shrink tube on the heat-shrink imaging lamp cable is as shown in Fig.14.
⑦
Insert the pin of imaging lamp cable into the plug that has just been removed (the cable is black,
white and blue in sequence from the inside to the outside), and then insert the plug into X26
base.
⑧
Install the sketch mounting plate.
Fig.10 Sketch mounting plate
Limiting plate of sketch
mounting plate
