77
11.3 Wire feeder:
Part
Check
Remarks
Pressure
adjusting
handle
Check if the pressure-adjusting handle is
fixed and adjusted to the desired position.
The unfixed pressure-adjusting handle
leads to the unstable welding output.
Wire-
feeding
hose
Check if there is dust or spatter inside the
hose or beside wire-feeding wheel.
Remove the dust.
Check if there is a diameter agreement of
wire and wire-feeding hose.
Non-agreement of the diameter of wire
and wire-feeding hose possibly leads to
the excessive spatter and unstable arc.
Check if rod and wire feeding groove are
concentric.
Unstable arc possibly occurs.
Wire-
feeding
wheel
Check if there is an agreement of wire
diameter and wire-feeding wheel.
Non-agreement of wire diameter and
wire-feeding wheel possibly leads to the
excessive spatter and unstable arc.
Check if the wire groove is blocked.
Replace it if necessary.
Pressure
adjusting
wheel
Check if the pressure adjusting wheel can
rotate smoothly, and it’s physically
complete.
Unstable
rotation
or
physically
incompleteness of the wheel possibly
leads to unstable wire feeding and arc.
11.4 Cables:
Part
Check
Remarks
Torch
cable
Check if the cable of torch is twisted.
The twisted torch cable leads to
unstable wire feeding and arc.
Check if the coupling plug is in loose connection.
Output
cable
Check if the cable is physically complete.
Relevant measures should be
taken to obtain stable weld and
prevent the possible electric
shock.
Check if insulation damage or loose connection exists.
Input
cable
Check if the cable is physically complete.
Check if insulation damage or loose connection exists.
Earth
cable
Check if the earth cables are well fixed and not short-
circuited.
Relevant measures should be
taken to prevent the possible
electric shock.
Check if this welding equipment is well grounded.
12. WARRANTY.
Duration:
The guarantee period is 24 months for users who do not carry out a professional activity with the
equipment. The warranty period is 12 months in all other cases.
Coverage
: The guarantee requires the manufacturer CEVIK S.A. to repair or replace for free all components
subject to verified manufacturing flaws. The CEVIK Assistance Service will be responsible for the repair or
replacement in the shortest possible time, compatibly with the internal commitments of the service, without
any obligation of compensation or reparation for direct or indirect damages.
EN
