-32-
PRO
PILOT
725 INSTALLATION & SERVICING MANUAL
Configuring
Your
Propilot
725
These
settings
vary,
depending
on
the
hull
configuration
selected:
FACTORY SETTINGS
PILOT A
PILOT B
PILOT C
Planing
Rudder Ratio
06
08
08
Configuration
Counter rudder
01
03
03
Semi-Displacement
Rudder Ratio
08
10
10
Configuration
Counter rudder
03
04
04
Displacement
Rudder Ratio
10
12
12
Configuration
Counter rudder
04
06
06
Installing a Preset Configuration
PILOT B
Press the MODE key to select PILOT A, PILOT B or PILOT C
settings.
C O N F I G
Press and hold the SEA STATE key until the LCD displays the
Configuration message (approximately 3 seconds).
Press either the or key to display the selection window.
Only one Preset can be switched ON. When you select one,
the other two are automatically turned OFF.
PLAN OFF
Press
either
the or key at this display to select the
Planing presets.
Press the SEA STATE key to display the next selection
window or OFF to exit this routine and store the settings.
SEMI ON
Press
either
the or key at this display to select the Semi-
displacement presets.
Press the SEA STATE key to display the next selection
window or OFF to exit this routine and store the settings.
DISP OFF
Press
either
the or key at this display to select the
Displacement presets.
Press the SEA STATE key to display the Restore selection
window or OFF to exit this routine and store the settings.
