-23-
PRO
PILOT
725 INSTALLATION & SERVICING MANUAL
Rudder Feedback Unit Offset
This
allows
a
rudder
offset
of
10º
maximum
to
be
input
so
that
the
rudder
amidships
position
signal
from
the
Rudder
Feedback
Unit
can
be
fine
tuned
without
physically
moving
the
Rudder
Feedback
Unit.
OFFSET R
The
third
press
of
the
SEA
STATE
key
brings
up
the
Offset
message.
Manually
position
the
rudder
in
the
amidships
position
then
press
either
the or key. The autopilot will now treat
this position as rudder amidships.
Note:
If the Rudder Feedback Unit also drives an analogue Rudder
Position Indicator, this procedure will not correct the analogue
indicator. In such an instance the Rudder Feedback Unit must be
positioned accurately.
Compass
The fluxgate compass bearing can be aligned with the bow of
Alignment
the vessel without having to physically rotate the compass.
MAGC 123
The
fourth
press
of
the
SEA
STATE
key
brings
up
the
magnetic
compass
message.
Rotate
the
Course
Select
knob until the
vessels heading is displayed by the right-hand three characters,
then press either the or key to store the amount of offset.
Reset
The fifth press of the SEA STATE key brings up the Reset
message. This gives you the ability to reset the installation
settings to their default values, the phasings to A and the offsets
to zero.
R E S E T
Press the or keys to achieve this.
To Exit
To Exit from the Installation Settings routine at any stage, press
the OFF key. This ensures that the autopilot remembers the
settings you have just programmed in.
Installation
Settings
