-20-
PRO
PILOT
725 INSTALLATION & SERVICING MANUAL
Front
Panel
(Key)
Functions
PROPILOT 725 FRONT PANEL (KEY) FUNCTIONS
Key
Primary Function
Secondary Function
1. Adjust LCD backlighting
When within a function used to switch
functions
ON/OFF
or to adjust settings.
1. Dodge to Port
1. Dodge to Starboard
AUTO
1. Select Autopilot Mode
1. Rudder Position & Off Course Indicator
2. Cross Track Error
(only if a Navigator is fitted)
ON/ST'BY
Switches Autopilot on
1. Rudder Position
1. Selects Standby Mode
2. Cross Track Error
(only if a Navigator is fitted)
OFF
1. Power off Autopilot
None
COMP
1. Select Compass Control
With LCD displaying COMP
ON/OFF
press & hold for:
1. VAR--EOO
Compass Variation
2. DAMP--07
Compass Damping
3. GYRO--ON
Gyro Selection
If Gyro is ON press again for:
GCAL--XXX
Gyro Calibration
(Must be switched OFF after calibration)
RATIO 0
Gyro
Ratio
(Gyro
Type)
2. Selects Windvane Control
With LCD displaying WIND
ON/OFF
press & hold for:
1. WIND-0
Windvane Interface Format
2. WTRM-05
Wind Trim
NAV
1. Selects NAV1
Press & hold for:
1. NAV1-0
Navigator Interface Format
2. NMG1-05
Navigator Gain
2. Selects NAV2
Press & hold for:
1. NAV2-0
Navigator Interface Format
2. NMG2-05
Navigator Gain
Pwr STEER
1. Switches Power Steer on/off
P/S
xxx
