30
CETONI Nemesys S Hardware Manual
To mount another syringe holder, simply proceed in reverse order. Make sure that the syringe holder lies
flat on the device when being screwed on.
5.11
Changing the Piston Holder
First pull the fixing screw all the way back and then push it all the way forward. A small O-ring will become
visible, which prevents the screw from falling out. Remove this; you can then pull out the screw.
Loosen the two grub screws in the handle of the adjusting screw with a 1.3 mm Allen key and remove it.
After you have also unscrewed the lock nut and unscrewed the rest of the adjusting screw, the two screws
with which the piston mount is fastened are accessible. You can unscrew these with a 3 mm and a 4 mm
Allen key and then change the piston holder.
O-Ring
Fixing Screw
