EACH 500 HOURS
VACUUM SYSTEM AIR FILTER (OPT.) — Replace filter element.
Replace sooner if suction gage reading drops to 4.6 in. Hg.
WHEEL BEARINGS — Lubricate at first 100 hours and at 500
hours thereafter. Reduce lubrication interval to 100 hours when
operating in dusty or sea coast areas, during periods of extensive
taxiing, or when numerous take-offs and landings are made.
MAIN LANDING GEAR PIVOT SHAFT BEARINGS — Lubricate.
RESTRICTOR VALVE AND SCREEN INSERTS — Remove and
clean in accordance with Service Manual instructions.
AS REQUIRED
NOSE GEAR SHOCK STRUT — Fill with hydraulic fluid and inflate
with air to 38 psi.
FUEL SUMPS AND VENT LINE DRAIN PLUGS — After prolonged
outdoor storage, remove fuel bay sump and vent line drain plugs to
remove possible accumulations of moisture.
HYDRAULIC POWER PACK FLUID LEVEL — Remove vent screw
from power pack, clean screen, and check fluid level. Service
with MIL-H-5606 hydraulic fluid in accordance with Service
Manual instructions.
ADDITIONAL SERVICE AND TEST REGULATIONS
Servicing Intervals of items in the preceding check list are
recommended by The Cessna Aircraft Company. Government
regulations may require that additional items be inspected, serviced
or tested at specific intervals for various types of flight operations.
For these regulations, owners should check with aviation officials
in the country where the aircraft is being
5-9
Summary of Contents for 177RG0073
