Warrior CB-xW Transmitters
U114.1.1
4
2.2
Warrior CB-xW Battery Installation and Replacement
The Warrior CB-xW transmitter operates between 2.0VDC to 3.2VDC, powered by two 1.5V type
“C” cell batteries (included when shipped). Nominal battery life expectancy is approximately 70
to 100 operating hours
1
before it becomes necessary to replace the batteries.
To Replace Batteries:
Observe proper polarity when placing batteries into the battery
compartment. Improper battery placement can cause excessive heat,
battery explosion, operator injury, and transmitter damage.
1. Before proceeding, press the
STOP
button DOWN to cut transmitter power.
2. Remove the battery cover by twisting it counter-clockwise.
3. Remove the discharged batteries and properly dispose according to local
regulations.
4. Place two new
“C” cell batteries in the terminal cavity. Observe proper polarity,
with the negative side (-) down and each positive battery terminal up. The battery
cap interior has the positive polarity marking (+) cut into it, as illustrated in Figure
2.
Figure 2. Warrior CB-xW Console Box Battery Installation
Replace the battery cover by threading it clockwise onto the cavity. You will feel tension as you
tighten the cap. Hand-tighten the cap to compress the compartment O-ring gasket seal
embedded in the cap.
1
At room temperature. Usage alone does not affect battery life; so does operating or storing the battery in too-
high or too-low ambient temperatures. For instance, the longer you expose batteries to extreme cold or hot
temperatures, the more likely it will negatively affect battery life. Factors such as battery age and initial quality
may also come into play.
OPEN
Two “C” Cell Batteries
Gasket
Seal
+
(Positive)
