2019 Cervis, Inc.
17
Note: You can test all switches except for the SELECT switch UP. (This switch allows
you to enter Switch Test Mode).
In switch test mode, the
Battery
,
A
, and
B
LEDs are used.
LED
Analog
Input
Digital
Input
Mode
Indicator
To Enter Switch Test Mode:
Before beginning, make sure the transmitter off.
1. Turn the transmitter on. (See steps 1
–2 in Section 2.4).
2. Enter
Maintenance Mode
. (See steps 1
–3 in Section 2.6).
3. While in maintenance mode, hold the
SELECT
switch UP for five seconds.
4. After five seconds, LED
B
starts blinking:
Indicating that the transmitter is in
Switch Test Mode
.
Note: LED
B
will continue blinking for as long as you are in Switch Test Mode.
When you move a switch on the transmitter (all switches are digital inputs), LED
A
lights solid for
0.5 second then goes out.
When you move a lever or joystick (these are analog devices with a digital input), LED
A
will
again turn on momentarily:
Then the
Battery
LED comes on and stays on solid:
