Technical Specifications
Voltage Supply
17V d.c./1.3 A h Li-ion
Idling Speed
0-400/0-1400rpm
Torque Settings
19+1
Forward & Reverse Rotation Yes
Chuck Clamping Width
Max 13mm
Battery Charging Current
1300mA
Mains Voltage for Charger
100-240V~/50-60Hz
Charging Time
1 hour
Weight
1.5kg
Charging Battery Pack
1. Remove the battery pack (5) from the handle, pressing the
push lock buttons (8) downwards to do so.
2. Check that your mains voltage is the same as that marked
on the rating plate of the battery charger. Plug the mains
plug of the charger (6) into the mains socket outlet, turn
on the power the green LED will illuminate.
3. Push the battery pack onto the battery charger. The green LED
extinguishes and the red LED will illuminate,which indicate that the
battery pack is being charged.
4. When the charging period is completed after approx 1
hour, the green LED will illuminate and the red LED will
extinguish.
5. The temperature of the battery pack may rise slightly
during the charging operation. This is normal. If the green
LED extinguishes during charging, the temperature is either above or
below the perfect charging temperature. In this case, pull the plug of the
charger and charge the battery in an environment in which the
temperature is either warmer or colder.
If the battery pack fails to become charged, please check
•
whether there is voltage at the socket-outlet
•
whether there is proper contact at the charging contacts on the charger.
If the battery continues to fail charging, please contact the Kogan customer
support team.
To ensure that the battery pack provides long service you should take care to
recharge it promptly.
You must recharge the battery pack when you notice that the power of the
cordless screwdriver drops.
Never fully discharge the battery pack. This will cause the battery pack to
develop a defect.
7
Summary of Contents for VDRILXACT
Page 1: ......
