Battery capacity indicator
The 3 colour LEDs will indicate the status of battery capacity as soon as you
press the ON/OFF switch (4).
•
All LEDs illuminate: Battery is fully charged.
•
Yellow and red LEDs illuminate: Battery has adequate charge.
•
Red LED: The battery is empty. Please recharge.
LED Lamp
The LED lamp (10) can be used in poor lighting conditions to
illuminate the area where you want to drill or screw. The LED
lamp (10) will be lit automatically as soon as you press the
ON/OFF switch (4).
Changing the Tool
Important
. Set the changeover switch (3) to its centre position
whenever you carry out any work (for example changing the tool,
maintenance work, etc.) on the cordless screwdriver.
•
The cordless screwdriver is fitted with a quickaction chuck
(9) with an automatic spindle stop.
•
Open the chuck (9). The chuck opening (a) must be large enough to hold
the tool (drill bit or screwdriver bit).
•
Select the suitable tool. Push the tool as far as possible into the chuck
opening (a).
•
Tighten the chuck (9), then check that the tool is secure.
Screwdriving
We recommend using self-centering screws (eg. Recessed head screws)
designed for reliable working. Be sure to use a bit that matches the screw in
shape and size.
Sound and Vibration
Sound and vibration values were measured in accordance with EN 60745.
L
pA
: sound press level 71,23dB(A)
K
pA
: uncertainty 3dB(A)
L
WA
: sound pressure level 82,23dB(A)
K
WA
: uncertainty 3dB(A)
Wear ear muffs! The impact of noise can cause damage to hearing.
Drilling in Metal
Vibration emission value a
h
= 3,782m/s
2
K uncertainty = 1,5m/s
2
Screwing without hammer action
Vibration emission value a
h
< 2.5m/s
2
K uncertainty = 1,5m/s
2
9
Summary of Contents for VDRILXACT
Page 1: ......
