3
In order to produce the most sonically faithful recreation possible, we continued to pour additional time, manpower, and money
into many custom parts specifically for this amplifier. In our humble opinion, the result of our labors is truly sublime and an
entirely unique circuit compared to our OTS series. Most of all, we hope the SSS fills the gap you have been searching for and
becomes an integral part of your tone equation to exhilarate your playing and music.
Rock on!
-
Nik Azam
2) QUICK SETUP
(for instant gratification)
1)
Plug your guitar using a 1/4” instrument cable into the INPUT on the left of the front panel
2)
Plug a suitable power cable from the SSS’s rear panel A.C. MAINS cable inlet to your wall power receptacle
3)
Plug the SSS into your speaker cabinet using 1/4” speaker cable
4)
Set the IMPEDENCE selector to the match the impedance of your speaker cabinet
5)
Plug the footswitch cable into the FOOT PEDAL jack on the rear panel of the amplifier
6)
Set the FET and PAB switches on the rear panel in the PEDAL position
7)
Set the LNFB switches on the rear panel in the lower position
8)
Set all rotary controls on the front panel to 12:00 (clock face)
9)
Turn MASTER control to about 9:00 (clock face)
10)
Set front panel BRIGHT, MID BOOST, and DEEP switches in the down position
11)
Set front panel ROCK / JAZZ switch in the up position (ROCK)
12)
Set rear panel MAINS switch in the ON position (with adjacent switch to STANDBY) for 30 seconds to allow tube
filaments to warm up
13)
Set rear panel OPERATE / STANDBY switch to OPERATE
14)
ROCK!!!!!!