17
Programming of valve-group irrigation
Programming Start Times for Weekly Irrigation
In this operation up to four daily starting times may be set for all of the programs
(A, B and C). Each start time operates firstly the designated main valve for the
program and sequentially the remaining valves will open.
Set selector to
START
mode (A, B or C programs). The Display will show:
STARTS I
Weekly Program symbol and OFF or the last programmed start time.
Press on .The start time will blink.
Press or to set the desired start time. (Pay attention to AM and PM settings).
If desired, repeat steps for
START
II, III , IV. To cancel a particular start time,
designate with and press . Time will blink. Press on or until OFF appears
on display panel.
For additional programs select new program (e.g. B), then repeat the above steps.
To continue programming see page 19 - Valve Selection.
RAIN
OFF
RESET
TEST
TIME / DAY
RUN
MANUAL
PROGRAM
WEEKLY /
CYCLIC
START
VALVES
DURATION
VALVE
DURATION
START
FERTILIZER
SENSOR
WATER
BUDGET
PROGRAM
A-B-C
INDEPENDENT
I
WEEKLY /
CYCLIC
START
The selector should be returned to the TIME/DAY mode
following modification or ending of the program.
EN
Summary of Contents for CMC-08-24
Page 72: ......
