HARNESS SYSTEM
- removal and re-assembly
16
Removal:
• Lift adjuster bar and pull both harness straps
out of current slots.
• Pull harness strap out of car seat, harness tie,
and tongues.
Store all parts for future use.
• Push buckle and crotch strap down into
crotch strap opening.
Re-assembly:
When re-assembling harness system, be sure
harness straps are not twisted.
Thread end of harness strap down through slot
in seat pad, under both Clips on bottom and
back up through slot in opposite side of
car seat pad.
Thread ends through tongues or shields
(available on some models).
Thread end through harness tie.
Thread ends through desired slots and adjuster
following instructions in “Operations and
Adjustments” section.
Pull buckle out of of buckle slot.
1
2
3
4
5
