20
Changing Harness Strap Slots:
6
OPERATIONS and ADJUSTMENTS
(continued)
7
The harness straps must go into the slots
even with or just above the shoulders.
A
To adjust harness straps:
Remove straps from harness plate
and adjuster bar
(fig. a)
.
B
Pull strap ends through slots and reinsert
them in the correct slots
(fig. b)
.
C
Reassemble straps onto adjuster bar
exactly as shown
(fig. c)
.
D
Push adjuster bar down
(fig. d).
E
Rotate lock down
(fig. e).
NOTE:
• Make sure both harness straps are
securely attached within Harness Plate
and Adjuster bar and locked into place
with Harness Lock.
• Make sure straps are
NOT
twisted.
Overhead Shield Adjustment (fig. f):
• To adjust: Press both buttons down and
move shield to desired position closest to
child. Release buttons to lock shield into
place. Check by pulling out on shield.
NOTE:
Shield does not need to contact
child when in closest position; harness
system restrains child.
