16
5.Press the Vacuum Seal button
(picture H).
The
vacuum pump indicator illuminates in green. The
vacuum pump is audibly working and the foil clings to
the content of the bag. As soon as the vacuum
procedure is finished the sealing indicator illuminates in
red. The complete process is finished as soon as both
indicators switch off.
6.Press the lock release buttons on either side of the
appliance to open the lid and take out the bag
(picture
I).
IMPORTANT: The sealing band could get hot after
repeated sealing processes. Do not touch the sealing
band with any parts of your body or heat-sensitive items
immediately
after sealing.
7.Check if the seam is even and smooth. The bag is
sealed properly, if there is a smooth line with no
interruption and crease on the seam. If in doubt, just
place another seal near the first one. For this, use the
Seal Only button.
NOTE:
If the desired vacuum is not reached, the vacuum system will shut down automati-
cally after 30 seconds without entering the sealing process. In this case, check whether
the bag has a leak, or the bag was not placed properly. The appliance is not intended for
continuous operation. Please wait for approximately 30 seconds with the lid open, before
starting a new sealing process.
8.If there are any liquids (e.g. condensate) or parts of the food in the dripping tray,
clean the dripping tray, before starting the vacuum pump again. For this, you can take out
the dripping tray.
9.Unplug the appliance, when you have finished operating.
Picture H
Picture I
