page 12 of 30
100mW
10:00
CW
Keep the SET key pressed for 2
–
3 sec. to enter the frequency setting mode.
You can set the desired frequency (1 - 9,999 Hz) with the
“+” or “
-
“
and SET
key. First the thousands digit, then the hundreds digit, etc. Once the desired
frequency has been set, confirm with the SET-key (keep pressed for 2
–
3 sec.).
The frequency is now transferred to the treatment screen on the display (at
first as a flashing value). The frequency is stored with the SET-key and displayed
on the screen.
A set value remains in the memory until it is overwritten by another frequency.
After the treatment mode has been set, the display changes to the following
screen:
The energy dose rate can be changed with the
“+” or “
-
“
key. The SET key
confirms the selected value. The selected dose automatically is being
converted into the corresponding therapy time required for the selected
output.
Frequency x
xxxx.xx Hz
100mW
30 J/LD
CW
