page 11 of 30
An individual frequency can be set like this
When the value is flashing on the display, use the
“+” or “
-
“
keys
to select the
frequency program you want and press the key SET for 2-3 seconds.
“+” or “
-
“
This is how you get to the setting mode for individual frequencies.
With the
“+” or “
-
“
keys you then can select the desired frequency and confirm
with pressing the SET key again. Further pressing the SET key will transfer the
selected frequency to the treatment display.
Example: you want to select the „The FI-Band: REGENERATION" :
1.
After booting is finished, use the arrow-key to select the program mode
*Therapy program*.
2.
The mode currently selected shows a black background and is flashing.
3.
Select the FI-Bands using the
“+” or “
-
“
key. The display now shows:
*FI: xxxxx*
4.
Press the arrow-key for 2-3 seconds. The display now shows in the first line
the frequency
*FI-autorun*
and in the 2nd line the currently selected
program.
5.
Select
*REGENERATION*
by means of
“+” or “
-
“
key. The display now
shows a black background and the value is flashing.
6.
Press the arrow-key twice, the 2nd line of the display now shows
*Regeneration*.
The value is not flashing anymore, and you're being forwarded to the setting
mode
*dose/time*.
The Sweeps can be selected accordingly.
Setting a freely programmable frequency:
Twenty memory locations
(FP1 to FP20)
are available for freely programmable
frequencies. When the value flashes, press the
“+” or “
-
“
key to enter the
frequency program FP. Keep the SET key pressed for 2
–
3 sec. to get to the
“Programmable”
screen on the display.
Programmable
FP1:xxx Hz
