Command
Description
p.xxxx.
OU.OU1on
Activates Output 1. If OU1 is set as pulsed, the
Output will activate for the configured pulse time If
OU1 is set as latched, it will turn on and remain on.
p.xxxx.
OU.OU2off
Deactivates Output 2. If OU2 is set to pulsed, the
command will have no effect. If OU2 is set to
latched, and currently on, it will turn off.
Examples
This function will ONLY trigger Relay 1
H. Please Call Me Activations
Command
Description
p.xxxx.
CO.PCMS.
”Please call”
Configures the Module so that a Please Call Me
message from any authorised phone number will
activate Output 1. The incoming please call me
SMS must contain the "Please call" text in order to
trigger output 1.
p.xxxx.
CO.PCMS.
”call
0811234678”
Configures the Module so that a Please Call Me
message from a specific authorised phone number,
in this case 0811234678, will activate Output 1.
The incoming please call me SMS must contain the
"call 08112345678" text in order to trigger output 1.
&
You can use the text ‘‘me’’ instead of specifying your own number
when adding, deleting, editing or querying your phone.
For example, p.xxxx.
AP
.
me
&
If you make a mistake during the programming via a mobile phone,
you will receive an ‘
error
’ SMS to let you know
Tips and Tricks
The Module must have sufficient airtime credit to send the SMSs.
Examples
