CENTURION SYSTEMS G-SWITCH-22, Programming Manual

Page: 3 / 10

Load airtime (L)
Query airtime (Q)
Sub-parameters
Airtime voucher number
(Airtime)
Loads or queries
airtime AT
(Query Phone)
Query phone
settings Phone number (up to 19 digits) QP
OU1PU Sets Output 1 as pulsed
OU1LA Sets Output 1 as latched
OU1PT Sets Output 1 pulse time in
milliseconds
OU2PU Sets Output 2 as pulsed
OU2LA Sets Output 2 as latched
OU2PT Sets Output 2 pulse time in
milliseconds
SS Requests Signal strength
CS Changes SIM card PIN number
EP Enables SIM card PIN checking
DP Disables SIM card PIN checking
SP Sets SIM PIN in memory only
QF Queries the Firmware version
QS Queries the Module settings
NP New system password
BE Backs up EEPROM
RE Restores EEPROM
IO Input/Output mappings
QB Queries the battery voltage
CL Clears the transaction logs
REBOOT Reboots the Module
SLE Enables sticky latches
SLD Disables sticky latches
RSL Resets sticky latches
STR Sets the string number and
associated text
ATE Enables the automatic hourly
airtime query
ATD Disables the automatic hourly
airtime query
INxR Makes the selected Input rising
edge active
INxF Makes the selected Input falling
edge active
INxB Makes both of the selected Input
edges active
INxBT Sets the selected Input Blanking
Time
(Configuration)
Configure Inputs,
Outputs and
system settings
OU1 Activates Output 1
DOU1 Deletes Output 1
OU2 Activates Output 2
DOU2 Deletes Output 2
IN1 Activates Input 1
DIN1 Deletes Input 1
IN2 Activates Input 2
DIN2 Deletes Input 2
DIN1S Deletes Input 1 string
DIN2S Deletes Input 2 string
DOU1S Deletes Output 1 string
DOU2S Deletes Output 2 string
(Edit Phone)
Edit a phone
EP
Phone number (up to 19 digits)
(Delete Phone)
Delete a phone
number from the
system
DP
All commands must start with ‘p.xxxx’ , where xxxx is a user-
defined four-digit password. The default password is 1234 .
For security purposes, this should be changed on commissioning.
& Each command and parameter must be separated by
a
period (.)
& Commands can be concatenated (linked), and must be
separated by a
space ( )
& The maximum message length is limited to 160 characters
& Commands are not case-sensitive
CO
Phone number(s) (up to 19 digits each).
Output to be activated by a Missed Call or
SMS (OU1/OU2)
Input to be monitored (IN1/IN2)
Sub parameters
User Limit UL (1–65536 activations) ²
Output text string (user-configured messages 1-20)
Input text string (user-configured messages 1-20)
2. A user limit restricts the number of
times a Missed Call will activate the unit.
Once the user limit is reached, the phone
number will automatically be deleted from
the system
(Add Phone)
Add a phone
number to the
system
AP
4. Command Overview
Parameters
Four-digit password
(Password)
System
password P
Description
If you add a ‘space’ and then the text ‘ ACK ’
to the end of any command, you will receive
an SMS back confirming that the command
has been received by the Module. For
example, p.xxxx.
DP .0841234567 ACK
(Airtime)
Loads or queries
airtime
ACK