1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Message number
Message text string
(max. 25 character including spaces)
Description
Parameters
Phone number(s) (up to 19 digits each)
Output to be activated by a Missed Call or SMS
(OU1/OU2)
Input to be monitored (IN1/IN2)
Sub-parameters
User Limit UL (1 – 65536 activations)
Output text string (user-configured messages 1-20)
Input text string (user-configured messages 1-20)
(Add phone)
Add a phone
number to the
system
AP
AP. Adding a Phone
This command allows new phone numbers to be added to the system.
When adding a new phone, it is possible to specify which Outputs are to
be activated by a Missed Call from the phone, and which Inputs will
cause a message to be sent to the phone. The number of times the
phone can be used to activate the system can also be specified.
Examples
(Commands have been highlighted for clarity)
p.xxxx.
AP
.
0841
234567.OU2
Adds phone number 0841234567 to the system,
and assigns Output 2 to be activated by a
Missed Call from this number.
Command
Description
p.xxxx.
AP.0841
234567
Adds phone number 0841234567 to the system and,
since no parameters are specified,
by default
assigns Output 1 to be activated by a Missed Call
from this number. This allows easy addition of new
phones to a basic system.
For your convenience, a template has been provided below which can
be used to note down which text strings have been associated with
which number in the system’s memory. It is also possible to query the
Module as to which messages are saved in its memory by sending the
following command:
p.xxxx.co.lm
, where ‘‘xxxx’’ represents the system password.
&
p.xxxx.AP.0823359981.OU2.‘‘10’’.IN1R.‘‘3’’.IN1F.‘‘4’’
Adds phone number 0823359981
to the system and configures
Output 2
to be
activated by text string 10, Input 1
to send an
SMS with text string 3 on rising edge activation and the same
Input to send an SMS with text string 4 on falling edge activation.
In such a case,
text string 3
would typically be something like
‘‘power off’’
and
text string 4
could be
‘‘power back on’’
.
p.xxxx.
AP.0841
234567.OU1.
OU2
Adds phone number 0841234567 to the system,
and assigns both Output 1 and Output 2 to be
activated by a Missed Call from this number.
p.xxxx.
AP.0841
234567.083765
4321.OU1
Adds phone numbers 0841234567 and 0837654321
to the system, and assigns Output 1 to be activated
by a Missed Call from either of these numbers.
The number of phone numbers that can be added
in one command is limited only by the maximum
allowed message length (160 characters).
p.xxxx.
AP.0841
234567.OU2.”
5”
Adds phone number 0841234567 to the system,
and assigns Output 2 to be activated by sending
user-configured message number 5.
When programming the Output to be
activated by a specific text string, the text
string number MUST begin and end with
double quotation marks (” “). The quotation
marks (” “) are only required when
programming - they must not be included
when sending the text message to activate
the Output.
p.xxxx.
AP.0845
632347.OU1.
UL20.
“7"
Adds phone number 0841234567 to the system,
and assigns Output 1 to be activated by sending
user-configured message number 7 with a user
limit of 20 uses. After 20 SMSs (activations),
this number will automatically be deleted from the
system, but only if the number has no other
functionality associated with it.
