with the product, or by CENTSYS
Make sure that the earthing system is correctly constructed,
and that all metal parts of the system are suitably earthed
Safety devices must be fitted to the installation to guard
against mechanical movement risks, such as crushing,
dragging and shearing
It is recommended that at least one warning indicator light be
fitted to every system
Always fit the warning signs visibly to the inside and outside of
the gate
The installer must explain and demonstrate the manual
operation of the gate in case of an emergency, and must hand
the User Guide over to the user
Explain these safety instructions to all persons authorized to
use this gate, and be sure that they understand the hazards
associated with automated gates
Do not leave packing materials (plastic, polystyrene, etc.)
within reach of children as such materials are potential
sources of danger
Dispose of all waste products like packaging materials, worn
out batteries, etc. according to local regulations
Always check the obstruction detection system, and safety
devices for correct operation
Centurion Systems (Pty) Ltd does not accept any liability
caused by improper use of the product, or for use other than
that for which the automated system was intended
This product was designed and built strictly for the use
indicated in this documentation. Any other use, not expressly
indicated here, could compromise the service life/operation of
the product and/or be a source of danger
Everything not expressly specified in these instructions
is not permitted.
page 4
