Manual test
This options enables check of the work the connected pumps or diverter valve (P1, P2, P3).
It is necessary to press the ''START'' next to the corresponding symbol of the adequate pump and
check to see if the pump is running. After pressing the'' STOP'' pump will stop working. Each time
you press'' 'START'' it becomes'' STOP'' and vice versa. On display will be the symbol of the
corresponding pump rotate when the option is active. Pump marks (P1, P2, P3) depend on the
currently selected CONFIGURATION which is written on the screen.
5.2.2. - 5.2.4. P1, P2, P3
This option allows you to check the motor device of flue gas channel cleaner.
It is necessary to press the ''START'' next to the corresponding symbol and check that the motor
device of flue gas channel cleaner will run turbulators. After pressing the'' STOP'', motor device will
stop working. Each time you press'' 'START'' it becomes'' STOP'' and vice versa. Turbulators
symbol is moving on display wen the option is active.
5.2.5. FLUE GAS CHANNEL CLEANER
START 1700 rpm - fan speed must be 1700 rpm
START MAX - fan speed must be on maximun (cca. 2800 rpm)
It is necessary to press the ''START'' next to the corresponding symbols and check if the fan
operates according to the selected option (1700 rpm or cca. 2800 rpm). After pressing the'' STOP''
fan will turn off. Each time you press'' 'START'' it becomes'' STOP'' and vice versa. The display will
rotate the fan symbol and will be displayed which speed spinning when the option is active.
5.2.1. FAN
Possible selection:
This option allows you to check the motor device of grate cleaner.
It is necessary to press the ''START'' next to the corresponding symbol and check that the motor
device moves burner grate. After pressing the ''STOP'' engine will return a burner grate in the work
position, the burner grate is closed (0%). Each time you press'' 'START'' it becomes''STOP'' and
vice versa. When this option is active, symbol of burner grate is moving on display. When grate
comes in one of two final positions, the main display shows the symbol "
" .
5.2.6. GRATE CLEANER
This option allows you to check the motor device of feeding screw.
It is necessary to press the ''START'' next to the corresponding symbol and check that the motor
device of the feeding screw is working. After pressing the'' STOP'' engine will stop working. Each
time you press'' 'START'' it becomes'' STOP'' and vice versa. When the option is active, on display
will move a symbol of the pellet feeding screw and will show animation falling pellet boiler.
5.2.7. FEEDER SCREW
52
Technical instructions REGULATION
PelTec / PelTec-lambda
