GB
Procedure to turn off
the
boiler
Turn off the pellet boiler by
pressing button , for a couple
of seconds until “OFF” is shown
on the upper display
REMARKS:
In case of repeated ignition lock-outs, while pellets are
fed regularly, there may be a problem caused by a failing
electric glow plug. In this case, while you wait for a
technician, the pellet boiler
boiler
can be manually started
by using solid fuel cubes (firelighters).
Manual starting procedure:
• open the door;
• take a solid fuel cube and place it inside the brazier
together with some pellets;
• light a match and set fire to the solid fuel inside the
brazier;
• wait a couple of minutes, close the door;
• follow the regular ignition procedure.
is a value which can go from 0 to 5. Pressing the key to
increase power
you can scroll the 5 available speeds.
If you set the value “0”, you will deactivate
On the following example, the
fan for hot air is switched off.
The speed is set on “0”.
On the following example, the
fan for hot air is working at its
highest speed 5.
Use the keys
and
to increase and reduce the
wished value.
Water temperature range: 30°C – 80 °C
Pellet feeding will stop immediately but the
boiler
will
continue working until the accumulated heat is fully
consumed, turning itself off automatically
after a
maximum of 30 minutes
.
REMARKS:
The
boiler
is fitted with
an automatic device that allows
cleaning the brazier after a
given period of time: when this
time is detected, the
boiler
fire
automatically reduces and
“
PUL FIRE
”; is shown on the display. After some minutes,
the
boiler
will start working regularly.
The heating power is set by the
keys
and
. A heating
power at Po 9 is suggested
during the first working hours of
the
boiler
.
To set the water temperature press the key
. only once.
You will see the words “
Set H2o
” blinking on the upper
display. You will read the water temperature on the lower
display.
To set the room temperature,
press the key
: twice: you
will see the words
“SET ARIA”
,
blinking on the lower display.
You will read the set temperature
on the upper display.
Use the keys
e
to change the value.
Room temperature range: 7°C – 40 °C
Working power and water temperature settings
Room temperature setting
Fan speed setting for hot air
It is possible to activate or deactivate the room ventilator
placed on the front part of the
boiler
.
The fan can be set with 5 different working speeds.
To set the fan for hot air, please join the following procedure:
press the key
twice to enter the setting menu for room
temperature.
On the upper display, next to the room temperature, there
Do not use any flammable liquid to start
the
boiler
. During the reload phase, do not
bring the bag of pellets in contact with
the hot
boiler
.
This adjustment is only useful for turning
on and off the hot-air delivery system
because the temperature coming
from the grates depends on the
boiler
status.
Do not unplug the power plug to turn
off the
boiler
; wait until the automatic
shutdown cycle finishes: the continuous
operation of the fumes extraction fan is normal
and may indicate that the
boiler
is still hot. In the
event of low temperatures, it might happen that
the
boiler
starts the smokes fan and circulator for
some minutes in order to prevent ice formation
on the pipes of the system. in the event there is a
power drop, the main board will exhaust the smokes
residuals as soon as the power supply is back on.
In order to do that, the main board will increase the
speed and show the words “
Cool FIRE
” on the display.
As soon as the cooling phase has been completed,
the
boiler
will automatically start up working as it
was set before the power drop.
