background image

Page 5

SKU 96087

for technical questions, please call 1-800-444-3353.

Make sure the Air Compressor is located on a flat, level, sturdy surface capable 
of supporting the weight of the Compressor, operator(s), and any additional 
tools and equipment.

do not move or transport the Compressor if the Air tank (17) is under pres-
sure.

Industrial applications must follow OSHA guidelines.

never stand on the Air Compressor.  

Serious injury could result if the Compres-

sor is tipped.

never leave the Air Compressor unattended when it is plugged in and running.  

Turn off the Compressor, and unplug the unit before leaving.

do not allow children and other unauthorized people to handle or play with 
the Air Compressor.

do not modify the factory set pressure shutoff or startup switches.   

This tool will 

do the work better and safer at the speed and capacity for which it was designed.

Avoid body contact with oils and lubricants used in the Compressor.  

If swal-

lowed, seek medical treatment immediately.  For skin contact, immediately wash 
with soap and water.  For eye contact, immediately flush eyes with clean water.

WARnIng!  

Risk of fire or explosion.  Do not spray flammable liquid in a confined 

area or towards a hot surface.  Spray area must be well ventilated.  Do not smoke 
while spraying or spray where spark or flame is present.  Arcing parts:  Keep Com-
pressor at least 20 feet away from explosive vapors, such as when spraying with 
a spray gun.

Risk of bursting.  

Do not adjust Regulator to result in output pressure greater than 

marked maximum pressure of attachment.

Risk of injury.  

Do not direct air stream at body.  To reduce the risk of electric shock, 

do not expose to rain.  Store indoors.

WARnIng!  

The brass components of this product contain lead, a chemical known 

to the State of California to cause birth defects (or other reproductive harm). (Cali-
fornia Health & Safety code § 25249.5, et seq.)

People with pacemakers should consult their physician(s) before use.  

Elec-

tromagnetic fields in close proximity to heart pacemaker could cause pacemaker 
interference or pacemaker failure.

WARnIng!  

The warnings and precautions discussed in this manual cannot cover 

all possible conditions and situations that may occur.  It must be understood by the 
operator that common sense and caution are factors which cannot be built into this 
product, but must be supplied by the operator.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

Summary of Contents for 96087













Reviews: