Page 4
SKU 95951
For technical questions, please call 1-800-444-3353.
Avoid accidental starting. Be sure the power Switch is off before plugging in.
3.
Leaving the Power Switch on while the machine is unattended invites accidents.
Remove adjusting keys or wrenches before turning the powered machine on.
4.
A wrench or a key that is left attached to a rotating part of the powered machine
may result in personal injury.
do not overreach. keep proper footing and balance at all times.
5.
Proper foot-
ing and balance enables better control of the powered machine in unexpected
situations.
use safety equipment. Always wear eye protection.
6.
Dust mask, nonskid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions. Al-
ways wear ANSI-approved safety goggles and a dust mask/respirator when using
or performing maintenance on this machine. Keep the work area well ventilated.
tool uSe And CARe
do not force the machine. use the correct machine for your application.
1.
The
correct machine will do the job better and safer at the rate for which it is designed.
Do not force the machine and do not use the machine for a purpose for which it is
not intended.
do not use the powered machine if the power Switch does not turn it on or
2.
off.
Any machine that cannot be controlled with the Power Switch is dangerous
and must be replaced.
disconnect the power Cord plug from the power source before making any
3.
adjustments, changing accessories, or storing the machine.
Such preventive
safety measures reduce the risk of starting the machine accidentally.
Always un-
plug the machine from its electrical outlet before performing any inspection,
maintenance, or cleaning procedures.
Store idle machines out of reach of children and other untrained persons.
4.
Tools are dangerous in the hands of untrained users.
Maintain machines with care.
5.
Properly maintained machines are less likely to fail
and are easier to control. Do not use a damaged machine. Tag damaged machines
“Do not use” until repaired.
Check for misalignment or binding of moving parts, breakage of parts, and
6.
any other condition that may affect the machine’s operation. if damaged,
have the machine serviced before using.
Many accidents are caused by poorly
maintained machines.
use only accessories that are recommended by the manufacturer for your
7.
model.
Accessories that may be suitable for one machine may become hazardous
when used on another machine.
