SKU 65342
For technical questions, please call 1-800-444-3353.
Page 8
Read the ENTIRE IMPORTaNT
SaFETY INFORMaTION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
TO PREvENT
SERIOuS INjuRY
FROM accIDENTaL
STaRTINg:
Turn the Power Switch of the
equipment to its “OFF”
position, wait for the engine to
cool, and remove the Spark
Plug before assembling or
making any adjustments to
the equipment.
TO PREvENT
SERIOuS INjuRY:
Operate only with proper
spark arrestor installed.
Operation of this equipment
may create sparks that
can start fires around dry
vegetation.
The operator should contact
local fire agencies for laws
or regulations relating to fire
prevention requirements.
Note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
aSSEMBLY INSTRucTIONS
Attach the two Back Axle Brackets (38) to the rear of the frame using four Hex
1.
Bolts (36) and four Lock Nuts (9). Then insert the Back Axle (37) into the bottom
hole of the two Back Axle Brackets.
(See Figures a and B.)
Attach the Front Axle Bracket (45) and Front Axle (43) to the front of the frame
2.
using four Hex Bolts (36) and four Lock Nuts (9).
(See Figures c and D, next
page.)
