background image

SKU 65342 

For technical questions, please call 1-800-444-3353. 

Page 35

LIMITED 1 YEaR / 90 DaY 

WaRRaNTY

Harbor Freight Tools Co. makes every effort 

to assure that its products meet high quality and 

durability standards, and warrants to the original 

purchaser that for a period of ninety days from date 

of purchase that the engine/motor, the belts (if so 

equipped), and the blades (if so equipped) are free 

of defects in materials and workmanship. Harbor 

Freight Tools also warrants to the original purchas-

er, for a period of one year from date of purchase, 

that all other parts and components of the product 

are free from defects in materials and workman-

ship (90 days if used by a professional contractor 

or if used as rental equipment).  This warranty does 

not apply to damage due directly or indirectly, to 

misuse, abuse, negligence or accidents, repairs 

or alterations outside our facilities, normal wear 

and tear, or to lack of maintenance. We shall in 

no event be liable for death, injuries to persons or 

property, or for incidental, contingent, special or 

consequential damages arising from the use of our 

product. Some states do not allow the exclusion or 

limitation of incidental or consequential damages, 

so the above limitation of exclusion may not apply 

to you.  THIS WARRANTY IS EXPRESSLY IN 

LIEU OF ALL OTHER WARRANTIES, EXPRESS 

OR IMPLIED, INCLUDING THE WARRANTIES OF 

MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the prod-

uct or part must be returned to us with transporta-

tion charges prepaid. Proof of purchase date and 

an explanation of the complaint must accompany 

the merchandise. If our inspection verifies the de

-

fect, we will either repair or replace the product at 

our election or we may elect to refund the purchase 

price if we cannot readily and quickly provide you 

with a replacement. We will return repaired prod-

ucts at our expense, but if we determine there is 

no defect, or that the defect resulted from causes 

not within the scope of our warranty, then you must 

bear the cost of returning the product.

This warranty gives you specific legal rights 

and you may also have other rights which vary 

from state to state.

3491 Mission Oaks Blvd.

PO Box 6009  •  Camarillo, CA 93011

(800) 444-3353

EMISSION cONTROL 

SYSTEM WaRRaNTY

california and united States Emission control 

Defects Warranty Statement

The United States Environmental Protection Agency 

(herein EPA), and Harbor Freight Tools (herein HFT) are 

pleased to explain the emission control system warranty 

on  your  1995  and  later  Small  Off-Road  Engine  (herein 

engine). New off-road, spark-ignition engines certified for 

model year 1997 and later, must meet stringent anti-smog 

standards  set  forth  by  the  EPA.    HFT  must  warrant  the 

emission control system on your engine for the periods of 

time described below, provided there has been no abuse, 

neglect or improper maintenance of your engine.

Your emission control system may include parts such 

as the carburetor or fuel-injection system, and the ignition 

system. Also included may be hoses, belts, connectors and 

other emission-related assemblies.

Where a warrantable condition exists, HFT will repair 

your engine at no cost to you including diagnosis, parts 

and labor.

Manufacturer’s Warranty coverage

The 1995 and later engines are warranted for two (2) 

years.  If any emission-related part on your engine is defec-

tive, the part will be repaired or replaced by HFT.

Harbor Freight Tools Emission control Defects 

Warranty coverage

Engines are warranted for a period of two (2) years 

relative to emission control parts defects, subject to the 

provisions  set  forth  below.  If  any  emission  related  part 

on your engine is defective, the part will be repaired or 

replaced by HFT.

 

Owner’s Warranty Responsibilities

As the engine owner, you are responsible for the per-

• 

formance of the required maintenance listed in your 

Owner’s  Manual.  HFT  recommends  that  you  retain 

all  receipts  covering  maintenance  on  your  engine, 

but HFT cannot deny warranty solely for the lack of 

receipts or for your failure to ensure the performance 

of all scheduled maintenance.
As the engine owner, you should, however, be aware 

• 

that  HFT  may  deny  you  warranty  coverage  if  your 

engine  or  a  part  has  failed  due  to  abuse,  neglect, 

improper maintenance, or unapproved modifications.

You are responsible for shipping your engine to a HFT 

• 

warranty station as soon as a problem exists.  Contact 

the HFT Customer Service department at the number 

below to make shipping arrangements.  The warranty 

repairs should be completed in a reasonable amount 

of time, not to exceed 30 days.
If  you  have  any  questions  regarding  your  warranty 

rights and responsibilities, you should contact the Harbor 

Summary of Contents for 65342





































Reviews: