background image

SKU 65342 

For technical questions, please call 1-800-444-3353. 

Page 36

Freight  Tools  Customer  Service  Department  at  1-800-

444-3353.

Harbor Freight Tools Emission control Defects 

Warranty Provisions

Length of coverage

1. 

HFT warrants to a first retail purchaser and each sub

-

sequent purchaser that the engine is free from defects 

in materials and workmanship that cause the failure of 

warranted parts for a period of two (2) years after the 

date of delivery to the first retail purchaser.

No charge Repair or Replacement

2. 

Repair or replacement of any warranted part will be 

performed at no charge to the owner if the work is 

performed through a warranty station authorized by 

HFT.  For emissions warranty service, contact the HFT 

Customer Service Department at 1-800-444-3353.

consequential Damages coverage

3. 

Coverage  under  this  warranty  shall  also  extend  to 

the failure of any engine components caused by the 

failure of any warranted part while it is still covered 

under this warranty.

coverage Exclusions

4. 

Warranty claims shall be filed in accordance with the 

provisions  of  the  HFT  warranty  policy  explained  in 

the box at the top of the previous page.  HFT shall 

not be liable for any loss of use of the engine, for any 

alternative usage, for any damage to goods, loss of 

time, or inconvenience.  Warranty coverage shall also 

be excluded for any part which fails, malfunctions, or is 

damaged due to failure to follow the maintenance and 

operating instructions set forth in the Owner’s Manual 

including, but not limited to:

Use of parts which are not authorized by HFT

a. 

Improper installation, adjustment or repair of the 

b. 

engine or of any warranted part unless performed 

by an authorized warranty center
Failure  to  follow  recommendations  on  fuel  use 

c. 

contained in the Owner’s Manual
Improper or inadequate maintenance of any war-

d. 

ranted parts
Repairs performed outside of the authorized war-

e. 

ranty service dealers
Alterations by changing, adding to or removing 

f. 

parts from the engine.

Service and Maintenance

5. 

Component parts which are not scheduled for replace-

ment as required maintenance or are scheduled only 

for regular inspection to the effect of “repair or replace 

as necessary” are warranted for the warranty period. 

Any warranted part which is scheduled for replace-

ment  as  required  maintenance  is  warranted  for  the 

period of time up to the first scheduled replacement 

point for that part.  Any replacement part, provided it is 

equivalent in durability and performance, may be used 

in performance of maintenance or repairs.  The owner 

is responsible for commissioning a qualified technician/

mechanic  to  perform  all  required  maintenance,  as 

outlined in the Inspection, Cleaning, and Maintenance 

section in this manual.

Warranted Parts

6. 

Fuel Metering System

1. 

Carburetor and its internal parts.

i. 

Fuel pump (if so equipped).

ii. 

Cold start enrichment system.

iii. 
Air Induction System

2. 

Intake pipe/manifold.

i. 

Air cleaner.

ii. 
Ignition System

3. 

Spark plug.

i. 

Magneto ignition system.

ii. 
Catalyst System (if so equipped)

4. 

Exhaust pipe stud.

i. 

Muffler.

ii. 

Catalytic converter (if so equipped).

iii. 
Miscellaneous Items Used in Above Systems

5. 

Vacuum,  temperature  and  time  sensitive 

i. 

valves and switches.
Hoses, belts, connectors, and assemblies.

ii. 

PLEaSE REaD THE 

FOLLOWINg caREFuLLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS 

PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN 

THIS MANUAL AS A REFERENCE TOOL ONLY.  NEITHER 

THE MANUFACTURER OR DISTRIBUTOR MAKES ANY 

REPRESENTATION OR WARRANTY OF ANY KIND TO 

THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE 

ANY REPAIRS TO THE PRODUCT, OR THAT HE OR 

SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE 

PRODUCT.  IN FACT, THE MANUFACTURER AND/OR 

DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS 

AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN 

BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT 

BY THE BUYER.  THE BUYER ASSUMES ALL RISK AND 

LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE 

ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, 

OR ARISING OUT OF HIS OR HER INSTALLATION OF 
REPLACEMENT PARTS THERETO.

Record Product’s Serial Number Here:

________________________________

Note:

  If product has no serial number, record month and year 

of purchase instead.

Note:

  Some parts are listed and shown for illustration pur-

poses only, and are not available individually as replace-

ment parts.

Summary of Contents for 65342





































Reviews: