Page 2
For technical questions, please call 1-800-444-3353.
Item 61373
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
Table of contents
Specifications ............................................. 2
Safety ......................................................... 2
Setup .......................................................... 6
Operation .................................................... 8
Maintenance .............................................. 10
Parts List and Diagram .............................. 14
Warranty .................................................... 16
Specifications
Electrical Rating
120V~ / 60Hz / 12A
Motor No Load Speed
3400 RPM
Log Capacity
20.5" L x 10" Diameter
Hydraulic Fluid Capacity
3.4 Quarts (3.2 Liters)
WARNING SyMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
IMpORTANT SAFETy INFORMATION
General Tool Safety Warnings
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1. KEEP GUARDS IN PLACE and in working order.
2. KEEP WORK AREA CLEAN.
Cluttered areas and benches invite accidents.
3. DON’T USE IN DANGEROUS ENVIRONMENT.
Don’t use power tools in damp or wet locations,
or expose them to rain. Keep work area well lighted.
4. KEEP CHILDREN AWAY. All visitors should
be kept safe distance from work area.
5. MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
6. DON’T FORCE TOOL. It will do the job better
and safer at the rate for which it was designed.
7. USE RIGHT TOOL. Don’t force tool or attachment
to do a job for which it was not designed.
Summary of Contents for 61373
Page 1: ......
