12
12
SCENIC 100W WW-CW User Manual
Eng
No.
Menu
Function
1
d5--
5-channel DMX control mode (need to connect a DMX controller)
2
d.2--
2-channel DMX control mode (need to connect a DMX controller)
3
n---
n000 to n255: Pure White from dark to bright
4
y---
y000 to y255: Warm White from dark to bright
5
F---
F000 to F255: flash speed, from slow to fast
6
T---
on: high temperature with half power function on
off: high temperature with half power function off
7
dS--
dr-0: Standard Dimmer Curve
dr-1: Dimmer Curve1
dr-2: Dimmer Curve2
dr-3: Dimmer Curve3
dr-4: Dimmer Curve4
6.1. Set DMX Address
When selecting a starting DMX address, always consider the number of DMX chan-
nels. If you choose a starting address that is too high, you could restrict the access
to some of the product’s channels. SCENIC 100W WW-CW uses 2 DMX channels
or 5 DMX channel (according to the DMX mode chosen), which defines the highest
configurable address to 511 or 508 to have all channels controllable.
Set the SCENIC 100W WW-CW starting address in the 001 - 508 DMX range to
enable control of up to 102 products in the 5-channel control mode. Set the SCNIC
100W WW-CW starting address in the 001 - 511 DMX range to enable control of up
to 256 products in the 2-channel control mode.
To change DMX address in case of 5-channel operation, press MENU till you reach
“d5--” page and press ENTER; you then see current DMX channel. Press UP or
DOWN to select desired value. Then press ENTER to confirm, and press MENU to
return to menu main page.
To change DMX address in case of 2-channel operation, press MENU till you reach
“d.2--” page and press ENTER; follow same instructions as 5-channel mode.
6.2. DMX Channel Assignments and Values
When use DMX control , the system takes 2 or 5 channels (depending on DMX code
selected. Below you can see the channel assignments for both modes.
1) 5-ch DMX512 Channel Chart
Channel
Function
Specification
CH1
All Dimmer
0-255 RGBW Dimmer, from dark to bright
CH2
PW dimmer
0-255 Pure white, from dark to bright
