manualshive.com logo in svg

Center 390, Instruction Manual, Page: 19 / 20

Share
Download
Center 390 Instruction Manual Download Page 19

Sound Level Meter 

 

 17

ƒ

 

Frequently Asked Question: 

1. I had connected Sound Level Meter to PC serial port and turned 
meter power on, but it still shows "NO CONNECTION".

 

Answer:

 It could be that all serial port are occupied by other application, 

close all other application. If it still don't work. Restart your computer and 
run SE390 again. 

2. How can I save the graph to a file which can be used in EXCEL?

 

Answer:

 When you save a graph to a file, the default file format is "*.ghf" 

and you can select *.csv to save files. CSV is an EXCEL file format. You 
can open it in EXCEL. 

3. How to uninstall SE390?

 

Answer: 

Uninstall SE390 by launching the Add/Remove Programs applet 

out of the Control Panel, highlighting the SE390, and clicking on the 
Add/Remove... push button, then it will remove the SE390 folder and files 
from your computer. 

4. Why loading data fail?

 

Answer: 

This might cause by the slow respond from some of the notebook 

PC system. 

5. How to zoom the graph?

 

Answer:

 Press the left mouse button and drag the cursor to select the new 

extents, and then release the mouse button. 

6. When I setup the real time sampling with a fast rate (eg. 0.1 sec), 
some of the sampling data might be lost.

 

Answer:

 This might be caused by slow response time of the PC. 

 

 

Summary of Contents for 390





















Reviews:

No comments