manualshive.com logo in svg

Center 390, Instruction Manual, Page: 14 / 20

Share
Download
Center 390 Instruction Manual Download Page 14

Sound Level Meter 

 

 12

12. SETUP TestLink SE-390 (Sound Level Meter)

—

RS232 interface software: 

y

 

The SE-390 package contains: 

1.80mm CD. 
2.Custom designed USB cable for SE390. 

y

 

System Required: 

Windows NT 4.0/ NT2000/ XP / VISTA. 

y

 

Minimum Hardware Required:   

PC or NoteBook with Pentium 90MHz or higher, 32 MB RAM ; 
At least 50 MB byte hard disk space available to install SE390. 
Recommended resolution 800X600. 

Install SE-390: 

1.We recommend close all other application before installing SE390. 
2.Insert setup CD disk to CD disk drive.   
3.Choose the Start button on the Taskbar and select Run. 
4.Type E:\SETUP and choose OK, then it will copy SE390.exe ( executable 

file ) and help file to your hard disk ( default is c:\program files\SE390 ).   

For detailed other operation instruction, please refer to the online help while 
executing SE390. 

ƒ

 

Main Menu 

File |

 Open- Retrieve files from the disk. 

Save -

 Save the active window (when the caption bar is highlighted) data to 

the disk.   

Print - 

Print the data of the active window(graph or list). 

Printer Setup - 

Select printer. 

File | Exit: 

Terminates SE390 program. 

View | Control Panel: 

By opening the Panel Window, the user can control 

meter via the button in this window. 

View | Real-Time Graph: 

Open Real-Time Graph display to graph the 

present data. 

Real Time Data | Run -

 Start collecting real time data. 

Stop -

 Stop collecting real time data. 

DataLogger: 

By opening the DataLogger Window, the user can load 

recorded data of meter to PC in this window. 

Output To Graph -

 Graphing tabular data.   

 

Summary of Contents for 390





















Reviews:

No comments