1
Place the ladder on the floor with both traverse feet
so that the side with the four operating buttons points
towards allowing you to properly operate these buttons.
Moreover, this side is also the correct side for climbing
the ladder
2
Place one foot on the crossbar to make it easier to pull
out the ladder. Make sure that the front of the ladder is
facing you, so that the lock buttons are visible.
3
Open the tool bag by opening the Velcro and read it
the instructions before use. The tool bag is intended for
storing small tools and material with a
maximum weight of 2.5 kg.
3. Correct use of this SPACE BAMBOO
Correct use of this ladder :
Ensure that the ladder is kept clean, collapsed and stored in a dry place.
We wish you safe and comfortable use of this ladder. If you have any questions, please contact the address
below in these instructions or the address you find on the sticker on the ladder.
4
Pull on the wall protection to pull the wall spacers arm
by arm.
Only once both arms have been extended vertically, you
can place the wall spacer in a horizontal position
5
Push both arms away from you, until they click into
place. If there is still a red indicator on the lock on the arm
of the wall spacer, the wall spacer is not securely locked.
Properly press the arm again until it locks correctly.
6
Pull the ladder completely out and check whether each
rung is properly locked.
Only if the locking indicator hangs down completely
visible, the rung is properly locked.
.
30
