1
Place the ladder on the floor with both traverse feet
so that the side with the four operating buttons points
towards allowing you to properly operate these buttons.
Moreover, this side is also the correct side for climbing
the ladder.
2
While extending the ladder, place one foot on the
crossbar for extra stability and first pull out the two top
stiles.
3
Make sure that both top stiles are fully extended and
check whether the locking pins automatically click into
place. Make sure that there is no red mark next to the
buttons.
If a red mark appears next to the buttons, unlock them
and release them after collapsing the top stiles. Repeat
this process until the top stile is correctly locked and no
red mark is visible.
3. Correct use of this BAMBOO ladder
4
Fully extend the ladder.
5
When extending the ladder, make sure that all rungs
are clicked into place and the red locking indicator is fully
visible.
6
If you do not want to fully extend the ladder, pull the
ladder out so that the rungs that you do not need are on
top (8).
7
Lean the ladder against the wall with the correct
inclination. This can be easily checked by placing your
feet in front of the ladder and using both horizontally held
arms, holding the ladders by the beams.
11
