Assembly and operating instructions
CENTAX-TT
024T-00130…00460
M024-00001-EN
Rev. 6
CENTA Antriebe Kirschey GmbH
18 / 54
5.3
Angular alignment
Fig. 5-3 Angular misalignment
Item
Info
Designation
Remark
2
Hub
3
Adapter
B
Flywheel
Customer part
D
Dial gauge
Customer part
Measure the angular misalignment with a dial gauge (see Fig. 5-3).
Attach the dial gauge to the adapter (3).
Position the sensor of the dial gauge (D) radially against the flat surface
of the flywheel (B) at a distance R.
Turn the adapter (3) with dial gauge (D) and the flywheel (B) slowly by
360°.
The maximum dial gauge deflection must not exceed the value 2xS
w
at any
point. The permissible tolerance S
W max
should be taken from the table below.
Align the units (calculated deviation
≤∆K
W max
).
Permissible angular alignment tolerance:
∆K
W max
=
0.1°
