Page 11
For technical questions, please call 1-888-866-5797.
Item 66967
Maintenance and Servicing
Procedures not specifically explained in this manual
must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Make sure that all loads are disconnected from the Inverter, the Power Button
is in the off-position and the cables are disconnected from power
source before performing any procedure in this section.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
1.
BEFORE EACH USE,
inspect the
general condition of the tool. Check for:
• loose hardware,
• misalignment or binding
of moving parts,
• damaged cord/electrical wiring,
• cracked or broken parts, and
• any other condition that may
affect its safe operation.
2.
AFTER USE,
wipe external surfaces
of the tool with clean cloth.
3. Maintain batteries according to
manufacturer’s instructions.
Check electrolyte level on all batteries
after charging and refill as needed.
Charge batteries according to
manufacturer’s recommendations
ONLY;
incorrect charging may cause
battery damage or explosion.
WARNING! TO PREVENT
SERIOUS INJURY AND DEATH
FROM ELECTRIC SHOCK:
DO NOT OPEN HOUSING!
Contains no user-serviceable parts.
Internal parts may be electrified, even
with unit off and power disconnected.
4. Internal electronic components must
be disposed of properly or recycled.
