background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 66967

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to 

potential personal injury hazards.  Obey all safety messages 

that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

IMPORTANT SAFETY INFORMATION

Read all safety warnings and instructions.  

Failure to follow the warnings and instructions may result in electric shock, fire and/

or serious injury.  

Save all warnings and instructions for future reference.

General Precautions

1.  People with pacemakers should consult 

their physician(s) before use.   

Electromagnetic fields in close 

proximity to heart pacemaker could 

cause pacemaker interference 

or pacemaker failure.

2.  WARNING: The brass components of 

this product contain lead, a chemical 

known to the State of California to 

cause cancer and birth defects or other 

reproductive harm.  (California Health 

& Safety Code § 25249.5, 

et seq.

)

3.  WARNING: This product contains 

or, when used, produces a chemical 

known to the State of California to 

cause cancer and birth defects or other 

reproductive harm.  (California Health 

& Safety Code § 25249.5, 

et seq.

)

4.  WARNING: The cord of this product 

contains lead and/or di (2-ethylhexyl) 

phthalate (DEHP), chemicals known 

to the State of California to cause 

cancer, and birth defects or other 

reproductive harm. Wash hands 

after handling.  (California Health & 

Safety Code § 25249.5, 

et seq.

)

5.  The warnings, precautions, and 

instructions discussed in this instruction 

manual cannot cover all possible 

conditions and situations that may 

occur.  It must be understood by the 

operator that common sense and 

caution are factors which cannot 

be built into this product, but must 

be supplied by the operator.

Summary of Contents for 200 watt continuous













Reviews: